Tag: promyshlennoct and equipment
The use of disinfectant – the fastest and most effective methods of cleaning and disinfecting surfaces. Modern disinfectants have a wide range of effects, they are used in everyday life, so and large industrial enterprises, where it is necessary to comply with sanitary cleanliness. Cleaning with a disinfectant may be carried out in various ways. As a rule, uses liquid, powder, foam and pastooobraznye funds. Perhaps all kinds can form the foam, whereby the active substance will act quickly and efficiently. Foam dezinfitsiruyusche means much longer in contact with hazardous microorganisms on contaminated surfaces, and thus is more efficient.
Disinfectant can also enhance its effect when the temperature rises, dissolved or mixed with water. In the event of dissolution of a disinfectant is obtained by just two types of disinfectants: chemical and physical. The chemical method involves the destruction of dangerous bacteria with active disinfectants, and physical – with the impact of temperature, light and other effects. Mechanical method of disinfection, usually involves removing the surface layer of contaminated items. All disinfectants on the composition, can be divided into several types: – organic (it is widely known and popular tools on the basis of surface-active agents) – Inorganic (acidic and alkaline products, suitable for application in food industry) – biologically active (including formaldehyde).
Qualitative disinfectant should quickly work on a wide range of dangerous bacteria, while have low toxicity and good solubility in water. Good solubility in water provides a process of surface treatment and also allows the foam to form. Liquid dissolved in water disinfectant quickly come into contact with the surface being treated, it is easier to apply and easier to wash off after treatment. Disinfection efficiency is achieved even at low concentrations of active ingredient.
The problem of splitting wood facing mankind for thousands of years. Primitive tools for solving this problem were created on the eve of birth of mankind. As a cleaver used stone axes. Later they were replaced splitters with metallic stitching part. However, the technique is not standing still. Even in the countryside is harder and harder to find a man with an ax.
Especially since we can not talk about industrial Kolka wood by hand. Axes Wood splitters are replaced. It is obvious that the cleaver can be divided into domestic and industrial. Their prices vary more than tenfold. Why is that? Primarily with the resource and metal work. Everyday cleaver is perfect to chop wood at his dacha on the kindling fire. But he was unable to work for a long time. Domestic Woodchopper not calculated the thermal regime, respectively, about any of their industrial use can not walk and talk.
Another class of Wood splitters are industrial. They are constructed with a view of the large share of work. Accordingly, they will be much harder. Hence, increases metal and price. Principle of Wood splitters follows. Place the file in a log chute in front of the knife. Hydraulic piston pushes on the blade and the log is split. There are several signs of the classification cleaver. One of them – is solved with a machine problem. Machines can either chop wood, or chop and trim. Accordingly, the trimming can be used to either drive or a bandsaw. Drive, as opposed to a band saw, does not require daily grinding. However, the disc models are more expensive. Professional Wood splitters differ in the maximum diameter of the block of wood, which can be cracked. With increasing diameter increases steel, power required and the cost of the machine. As the power source can be either your own engine machine, or tractor pto.