Yarn For Knitting

April 2, 2012

General

Comments Off on Yarn For Knitting


Knitting is one of the most common types of needlework. Knitting can be any items of clothing and decorative items used in everyday life: napkins, pillowcases on cushions, runners, toys, souvenirs and other yarn. For Knitting can use any yarn: wool, wool blend, cotton and synthetic. When purchasing yarn, it should be the thickness of the thread, its elasticity, strength of color. Also, remember that too tight twisted yarn is not suitable for knitting, because cloth can get the hard, straight. Misalignment can not be eliminated ironing through a damp cloth, because after a while it appears again.

Such a yarn is better to use to crochet. Elasticity – the ability to thread take its original shape after unloading. If the thread under tension springs in his hand, trying to restore the original length, it is durable and associated out of it things are almost not deformed. If the thread breaks even with a slight tension, it is recommended to combine it with a more solid, or a product-related from this yarn will be deformed. To test the strength of color yarn wet end of the thread with water, wrap it in white cloth and hot iron. If the fabric is not no more traces of color, then painted with durable yarn. Yarn factory production is sold in skeins or balls. On the label shall contain: the name of the factory of the manufacturer, the nature of fiber metric number or thickness of the yarn, the length of thread on a reel, coil or coil mass, batch number, the flow wire on the product, etc.


Water Supply Pipe

March 27, 2012

General

Comments Off on Water Supply Pipe


The first things usually start picking pipe water – their price. That is, the value of the material, of which the water supply pipe, installation of additional equipment and materials. All together it will be constitute the water system. What materials are made of water supply pipe? Steel pipes of water supply. Produced is usually of two types: non-galvanized and galvanized (black). Galvanized pipes are mainly for the installation of potable water pipes and hot water.

Galvanized pipes, in contrast to the black coated with zinc, which prevents them from corrosion in an aqueous medium. Industry produces non-galvanized and galvanized pipes random length (non-uniform in length) from 4 to 12 m and a cut length (all pipes of this party a certain length) from 4 to 8 m with an allowance for each cut to 5 mm and a maximum deviation over the whole length + 10 mm. K steel pipes supply the following requirements. Pipe surface must be flat and smooth, with no sag and crack. A small amount of oxide layers, minor dents and risks. In the suture zone may be a gently sloping thickening of the height not exceeding 0.5 mm.

On the surface of galvanized pipes should not be not covered with zinc sites, bubble zinc coating; allowed a small surface roughness, and the influx of zinc. Cast-iron pipes of water supply. Used for outdoor water pipe systems, pressure gravity sewer systems and inland waterways. Advantage – increased durability compared to steel and corrosion resistance.


Woodchopper

March 20, 2012

General

Comments Off on Woodchopper


The problem of splitting wood facing mankind for thousands of years. Primitive tools for solving this problem were created on the eve of birth of mankind. As a cleaver used stone axes. Later they were replaced splitters with metallic stitching part. However, the technique is not standing still. Even in the countryside is harder and harder to find a man with an ax.

Especially since we can not talk about industrial Kolka wood by hand. Axes Wood splitters are replaced. It is obvious that the cleaver can be divided into domestic and industrial. Their prices vary more than tenfold. Why is that? Primarily with the resource and metal work. Everyday cleaver is perfect to chop wood at his dacha on the kindling fire. But he was unable to work for a long time. Domestic Woodchopper not calculated the thermal regime, respectively, about any of their industrial use can not walk and talk.

Another class of Wood splitters are industrial. They are constructed with a view of the large share of work. Accordingly, they will be much harder. Hence, increases metal and price. Principle of Wood splitters follows. Place the file in a log chute in front of the knife. Hydraulic piston pushes on the blade and the log is split. There are several signs of the classification cleaver. One of them – is solved with a machine problem. Machines can either chop wood, or chop and trim. Accordingly, the trimming can be used to either drive or a bandsaw. Drive, as opposed to a band saw, does not require daily grinding. However, the disc models are more expensive. Professional Wood splitters differ in the maximum diameter of the block of wood, which can be cracked. With increasing diameter increases steel, power required and the cost of the machine. As the power source can be either your own engine machine, or tractor pto.


Babylonian Temples

March 16, 2012

General

Comments Off on Babylonian Temples


The name of the inventor of the brick will remain in history as no more and the names of inventors of all the usual, simple but fundamental things. Anyway, the man opened the properties of clay, this ancient building material. The oldest samples of baked clay were found in what is now Slovakia, and date back to the Paleolithic. The age of these samples – about 25 thousand years. Today the pottery is called a wide range of products, in baked clay.

Basic and most important of these products is a brick. For the construction of burnt brick was used from ancient times. This structure of Egypt and Mesopotamia, III-II millennium bc, and the architecture of Mesopotamia and Ancient Rome. Over time, instead of mud-brick was used more practical ceramic. According to Herodotus, in the vi century bc buildings of Babylon were richly and beautifully decorated with ceramic brick. Tiered Babylonian Temples got off with blue glazed brick.

Thanks to the brick began to develop complex architectural shapes: arches, vaults, etc Complicating the ornamentation and expressiveness of the brickwork. Sophisticated enough to remember and unique forms of Gothic architectural monuments of 12 century, producing a strong impression so far. In ancient Greece, as well as in the Byzantine brick called plinfy, and he had the dimensions 30 x 60 x 3.9 cm in 10 th century through the Byzantine brick appeared in ancient Russia. One of the first Russian brick buildings is considered to be Desiatynna Church (Kiev). Bricks for the building of temples are made at monasteries. Year 1475 marked the emergence of the first Russian brickworks. Dimensions plinfy could vary depending on need. In the 15 century. in Russia began to apply a "brick by Aristotle, which dimensions have looked more like modern. Standards of modern brick determined in the late 20's 20. and were 250 x 120 x 65 mm (so-called single). Brick industry has begun to develop since the mid 19 century, and today we have around 15 thousand combinations of shapes, colors and textures. Due to the development production of bricks, architecture can be an outstanding and unique appearance. Brick – a popular and practical material is present, it can be a different kind, full-and hollow, and perhaps artificial stone. Hyperpressed brick Litos – this is an artificial stone are in high demand due to their properties. This wonderful tile, and beautiful structural material. According to dictionary definition, bricks – clay brick. " However, modern brick has gone much further than this simple definition. Source: History of bricks


ARBs

March 11, 2012

General

Comments Off on ARBs


DET-320 can used as a mini-power plants to provide electricity to small communities. The largest of the produced throughout the continent heavy bulldozer T-800 (T-75.01) working weight 106 tonnes, of which equipment has to 29.5 tons, is equipped with a 820-horsepower engine 6DM-21T with a turbocharged and intercooled. Hydromechanical transmission provides four forward gears and two – the rear and consists of a single-stage three-wheel torque converter, driveline, and module (three-shaft planetary gearbox and a rotation stop brake and a conical gear), hydraulic transmission, two-stage final drive with a pair of spur and planetary series. Disk clutches KP mechanisms rotation and stops the brakes are working in oil and require no adjustment. T-75.01 is designed to develop the most severe permafrost and rocky soils in the mining industry, to carry out large volumes of earthwork in road construction in various climatic conditions without carrying out blasting in overburden. Promtractor " (CHZPT) now offers three basic models of ARBs: T-25.01, T-35.01 and T 50.01 traction grades 25, 35 and 50, respectively. All machines are equipped with a planetary manual, three-point semi-rigid suspension with external oscillating axle trucks, which provides high traction properties and reduces shock loads on the undercarriage system. The first copies of the bulldozer T-25.01 were issued in 1985.

A few years later at its base were fabricated pipe-layer TG-321, and reclamation of TM-25.01. Repetitive production of T-25.01 only began in 1995. The bulldozer can be used in the industrial, oil & gas, hydraulic engineering, and mining for heavy earthmoving works, including the development of frozen and rocky ground.


Paints

March 2, 2012

General

Comments Off on Paints


If you go into any building store, then on the counter see a large assortment of acrylic paints, even in the line of one manufacturer. What – do they differ? Why are one manufacturer to produce several types of acrylic paint? The difference lies in the characteristics of the paint. Paint for painting the ceiling should have a snow-white color and good coverage, but this paint is absolutely no need to have good resistance to washing and can not be tinted in vibrant colors. Paint, intended to paint the walls in the bedrooms, will be more resistant to abrasion and can be otkolerovat in more colors. In addition, there are many highly specialized paints designed for painting surfaces on which there is grease, traces of smoke and nicotine. When painting walls with acrylic paints obtained noble matte finish, and if necessary to get coverage with a little gloss or necessary paint the walls with high wear and tear? For such tasks, there are latex paints. Latex paint.

Another product of the paint industry is a latex paint. Their main advantage over other water-based paints are: increased resistance to wet abrasion, the possibility of obtaining silk matte surfaces, and the ability to cover the base thinly. All this gives repair walls, producing color of the wallpaper before painting retain their texture. Why is it better suited for latex paint? The chemical composition of latex paints when dry form a thin film, which is capable of cover any surface structure. On this if bought wallpaper by painting or using textured plaster, paint is the best – latex paint, give it your desired color and surface texture will save.


Navigation

February 25, 2012

General

Comments Off on Navigation


It is therefore not surprising that in the late seventies, the Declaration of Macchu Pichu, recorded that the world faced a triple crisis, obviously interrelated: energy, environmental and food industries. In an increasingly interconnected world, Argentina is no stranger to this problem or its possible solutions. We understand that a country demographically balanced in terms of its abundant availability of natural resources, is better able and attitude to help reverse this situation, which would necessarily be reversed with changes multidimensional. One of the structural imbalances that have suffered from Argentina, is a significant factor in the deliberate disruption of rail transport system and navigation cabotage, allowing the emergence of complex automotive roadman. It is striking, as in the United States, has in modern times, much disclosure the issue of "America post-car." Namely the United States after car.

Many analysts of that country, they believe that the horizon is installed, depending on the price increased fuel prices, the disappearance of the primacy of the automobile as a means of transport and the subsequent revaluation of the railway. In Europe the situation is different, mindful that as countries have always had as limiting the lack of oil resources (the exception was the North Sea fields, whose yields are falling) maintained ferrotranviarios systems and navigation of its rivers. Despite the upgrading of technologies and known as the blimp, wind, geothermal, geothermal, tidal, biomass and hydrogen and hopes to encourage in the hot plasma and antimatter, the fact that imposing a restructuring which will necessarily be traumatic.


Russian Federation

January 19, 2012

General

Comments Off on Russian Federation


Agreement of co-investors often contain terms of distribution the balance of power on the board of directors, determining the amount and procedure for election of directors, representing the interests of certain shareholders, various restrictions on the purchase and sale of shares, the special conditions of decision-making meeting of the shareholders and board of directors, restrictions on free shareholder vote at a general meeting of shareholders and others. As a striking example of shareholders ‘agreements of co-investors can be reduced shareholders’ agreement of such large companies as JSC “VimpelCom (Beeline) and Telenor and Altimo (“Alfa Group”), where under the agreement, each shareholder may nominate a board of four, with one in four from each party must be an independent director, and one can be nominated Telenor only with the consent of Altimo; OJSC “Wimm-Bill-Dann”, which sets out the obligation for parties to provide the majority of independent members on the board of directors of the company, AFK “Sistema” and Deutsche Telekom, where Deutsche Telekom in exchange for a guarantee of two seats on the board Directors must, within 6 months after the IPO not to sell its shares in OAO “MTS”, OJSC “MegFon”, where the Swedish law was a raised a quorum of 75% of the vote to decide the general shareholders’ meetings, OAO “Power Machines” which enshrined the condition to provide participants the preemptive right to repurchase the shares sold by the other party to it 2. According to Article 32.1 of the Federal Law of December 26, 1995 N 208-FZ “On Joint Stock Companies ‘shareholders’ agreement drawn up in writing in the form of a document signed by the parties to the agreement and binding on all shareholders of the signatories, is to respect all shares held by the side of the agreement, but agreement can not justify recognition of decisions of the company to void the agreement can not be prescribed the duty of shareholders vote as directed by management bodies, in respect of shares which an agreement 3. The agreement may provide for the coordination of various actions to manage the joint-stock company measures of civil liability for failure and / or improper execution of the agreement, the obligation of shareholders to vote a certain way, agree with the option of voting by other shareholders, dispose of or acquire shares at a predetermined fixed price, or, alternatively, to abstain from alienation of shares to certain circumstances. This article was accepted, when the institution shareholders agreements have already been widely distributed, but had no legislative fix, and because the Russian law and practice have not admitted the existence of shareholders agreements in their Western sense, these changes the existing law was a legislative framework for the conclusion of shareholder agreements.


Russian Virtual Airlines Skyairlines

January 7, 2012

General

Comments Off on Russian Virtual Airlines Skyairlines


VA SkyAirlines Russian Virtual Airlines SkyAirlines is based in Moscow's Domodedovo airport (UUDD) and has extensive experience in network operations FSAirlines (formerly FlyNet). Recently, the virtual airline SkyAirlines flies as the network IVAO. The company has an extensive route network in Russia, CIS and Baltic countries, CIS and foreign countries. Airlines route network is constantly evolving and improving. Airline pilots gathering for flights on aircraft Boeing-737/747/757/767, Airbus-A319/320/321 /, MD11 (F), the Tu-154 and Il-76TD, as well as on other aircraft of Russian and foreign proizvodstva.FlyNet – registering Online you can create a virtual airline and flies. The site You can download the client for the simulator, in which a built-in failures. All flight time logged and displayed on the site.

At first glance, nothing new in the system there, but the selection of features is well thought out – realistically simulated economy airline, to analyze the proposed set of statistical data about your activities. Completed flights are displayed on the map Google Maps. The forum of the Russian portal Avsim.ru already being quite active discussion of FlyNet:, and our pilot Navy established a virtual company Pelican Cargo Air. The system is completely in English, but one of the members of the forum have translated user manual in Russian. Flying in the network are carried out under control of the dispatch services, using real fraziologii radio. All this makes it possible to work out the real pilots and improve their skills of navigation, piloting and making decisions critical situations.

Moreover, the ability to touch this element exists in all comers. Our pilots in real life can be anything. Nevertheless, aircraft for them, though virtual, is not alien to concept. As in real life, there are many online virtual airlines. Our virtual airline is one of them. We carry a virtual passengers and cargo. Airline pilots charged flying hours, increase their level of knowledge. In the team we support the friendship We hope to see you in their friendly series!


LamiPak Application

January 1, 2012

General

Comments Off on LamiPak Application


This is due to the fact that the figure is put through a special frame, and it overlaps the edge of the package of paper. Hot stamping – a method of application that is used to produce as little as major parties holiday paper bags (five hundred thousand items). For this type of print will make a special stamp with which to be quite ottisnit large number of packages of paper. Certainly, in the If you have a small edition of cardboard packages are production of polymer matrices or magnesium will cost a pretty penny or a ruble. Payback of the matrix with this method of application (embossing) of proishoditsugubo amount of one hundred colorful paper bags. In small batches order gift packages carton stamping, you can simply recover with the assistance of designer paper. You can take a special design cardboard or paper, tinted in the mass, and ottisnit your logo on a paper bag bright colored metallic foil, and this for the money will be not much more expensive, plus, and beautiful than the stencil type of application.

Believe me, the gift bag this paper only on the improve. It is also important to remember that the price of a stamp depends on the size and complexity caused by the logo. And in that case if the party can not recover the cost of the stamp, in which case there is a sense make negotiations with the buyer, so he simplified the maximum damage information or image that will stamp is cheaper and more profitable production. Simplify or reduce can simply view only the logo, however, and color. Than fewer stories on the logo – the cheaper the cost consumables.

Sometimes turns out to reduce the cost of producing print almost in half. And there may be redundant services of a competent technician or coder, and it will help to increase your company's success in production. Well, making a colorful cardboard package with a vivid print can be profitable. It is important to choose a competent method of making application to the package paper, and modern technology to help you save money, and customers remain satisfied. Based on materials from the portal LamiPak. Ru